Heidenhain TNC 426/430

Heidenhain TNC 426/430

The Heidenhain TNC 426/430 is part of the interchangeable control WinNC. WinNC allows the user to learn all CNC industry controls that are common on the market on a CONCEPT machine or on a programmers place. One of these controls is the Heidenhain TNC 426/430. It corresponds in terms of handling and function to the particular original control and can also be installed on a PC. The user has the possibility to work on the PC as well as on the machinecontrol and gets familiar with all aspects of control programming in detail.

Highlights

  • Horizontal and vertical control via softkeys like the industry control Heidenhain TNC 426/430
  • Graphic simulation with line graphics
  • Detailed error messages about drive problems and programming faults
  • Operation via PC keyboard, control keyboard, mouse or digitizer
  • Languages: German, English, Swedish, French, Spanish, Italian
  • Programs, tool data, pocket tables as well as zero and position offsets will be stored permanently
  • Program titles can be given individually
  • Window oriented, modern user interface
  • Comprehensive editor with intermediate memory storage function
  • Large NC program memory (limited only by the size of the hard disc)

Functions

Data in/output of workpiece program files:
Workpiece program files can include several main and subprograms and further corresponding tool data. Moreover, workpiece data, R-parameter and zero offsets can be exported and imported.
Automatic measuring of tools:
When scratching the reference workpiece the workpieces offsets will be taken over.
Automatic measuring of position offsets:
When scratching the measured workpiece the position offsets will be taken over.
Dry run:
In the run-up to the machining process collisions and programming mistakes can be avoided and corrected by using the dry run.
Preliminary block run:
Already finalized NC codes can be skipped.
Editor:
In order to ease the operation and the programming the control is equipped with an editor with helping cycles and pictures.
Contour processor with graphic simulation:
The contours the workpieces should have after the machining process are illustrated by graphics in the programming process.
Diagnostics:
Alarms, signals, versions and customer information are displayed by the diagnostics.

Downloads

 

Software-Demos

Our demo versions contain the full function range, but they are limited to 30 days (from date of installation). You can convert the demo version into a full version by using the license manager and entering the activation code.

Title Version Filesize
DEMO 2.14.0001 45.98 MB
 

Updates/Upgrades

Get up to date. The only requirement is that you have a valid license key. The improvements concerning the update are documented in History.

You are reminded that, in case of an update, all WinNC-components  (WinNC-controls, 3DView, DNC, Robotic, CAMConcept,...) located in the regarding directory must be updated to the current release-version.

Title Version Filesize
UPDATE 2.14.0001 45.98 MB
short description für update installation 415.01 KB
ACC update 3.02.0003 30.39 MB
MSD/PLC 2017.11.22 791.17 KB
Remove SPOX 2006.12.05 1.92 MB
AC95_ACC 2013.10.15 3.12 MB
ACpn Update 1.10.0006 191.26 MB
 

Brochures

Title Version Filesize
Brochure EMCO Software 1.46 MB
 

Instructions/Manuals

Title Version Filesize
control manual milling E2013-12 9.76 MB
startup milling and turning K2016-05 989.40 KB
 
Get Acrobat Reader web logo Get Adobe Reader

More downloads

Title Version Filesize
Digitizer-Overlay Mill 99.48 KB
 

Versionhistory

Version

     

Date

     

Changes

2.1430.05.2017Compatibility WinNC for Heidenhain TNC 640
14.09.2015Release for Windows 10
2.1219.12.2014Adaption ACpn-machines, Easy2control
2.1011.03.2013Compatibility 'WinNC for Sinumerik Operate' / Windows8
2.0815.05.2012Compatibility 'WinNC for Sinumerik Operate'
2.0625.09.2009Integration CM250
2.0423.06.2008Integration CM450
2.0230.10.2007VISTA, industrial strength tool-path-compensation
WinConfig replaced by EMConfig
1.4203.06.2005tool-administration for 3D-View
1.3808.02.2008Toollength-compensation in Jog-Mode,
Bug-fixes M2, M89
1.3502.11.2004Update
1.3202.06.2004Update
27.09.2004Spanish version
1.3005.05.2004new SL2-Cycles, new 3D-View,
positioning with manual data input
1.2602.03.2004Revision of the thread-cycles
1.2515.01.2003Revision of the implemented cycles
1.2025.09.2003Market launch

Licenses

Licenses Heidenhain 426
Single license
Multiple license: External programmer work place for any CNC machine tool
Multiple license
Multiple license: For external NC programming of NC controlled machine tools. It may be installed within an institute registered by the licenser in an unlimited number on PC workstations respectively in a network.
Machine license
Machine license: Control software for all EMCO Concept machines
School license
School license: Temporary multiple license

Options/Accessories

EMCO Win3D-View

EMCO Win3D-View

Win3D-View is a 3D simulation for turning and milling and is available as an option in addition to the WinNC Control. Graphic simulations of CNC controls are designed especially for industrial experience. Win3D-View displays exceed industry standards. Tools, blanks, clamping devices, and work processes are highly realistic. The system checks the programmed travel of the tool to prevent collision with clamping devices and blanks.

Easy2control

Easy2control

“Easy2control” adds a range of attractive applications to the successful interchangeable control system used in EMCO training machines. Suitable for use in machines and simulation workplaces alike, it displays additional control elements directly on the screen and, when used together with a touchscreen monitor, provides the ideal input interface. With support for a wide range of keyboard variants, customer-specific screen layouts and tailored solutions for individual customers, Easy2control represents a promising and highly flexible extension to the modular EMCO training concept.
The interchangeable controls are represented using an on-screen keyboard, which makes switching between different control systems even easier and quicker.

Easy2operate

Easy2operate

Portable Machine Operating panel to operate the machine via hardware, includes axis buttons, feed override switch, mode switch etc. together with EMCO Easy2control.



Concept machines

Concept machines

Whether for small businesses or for professional CNC training the Concept machines can be applied flexibly. With its modular concept the machine series can be used in a productional CIM network as well as for training purposes equipped with training softwares and coursewares. For more information about the Concept machines click "machines" in the main menu.

Robotic

Das Robotik-Interface wird für den Anschluss der Concept-Maschinen an den FMS-/CIM-Betrieb benötigt. For more information about Robotic, click here.

EMCO CAMConcept

EMCO CAMConcept

CAMConcept is innovative software for complete CAD/CAM and CNC training, from design to manufacture.CAMConcept incorporates both the functions of a professional CAD/CAM system and the advantages of a special training program. All core CAD program functions are available. Graphic displays of CNC cycles allow quick programming, while simulations and collision checks ensure that control programming is safe. For more information, click here.

Basic keyboard

Basic keyboard

An external keyboard supports practical programming on an external programmer work place.

Control specific keyboard - key module

Control specific keyboard - key module

In addition to the interchangeable control all Concept machines can be equipped with, there's the possibility to get the control specific keyboard. By using the control keyboard (accessory with interchangeable key modules for the respective control type) the operation becomes easier and has a higher didactic value by its similarity to the original control.