FAGOR 8055

FAGOR 8055

The Fagor 8055 is part of the interchangeable control WinNC. WinNC allows the user to learn all CNC industry controls that are common on the market on a Concept machine or on a programmers place. One of these controls is the Fagor 8055. It corresponds in terms of handling and function to the particular original control and it can be used on a commercial PC. The user has the possibility to work on the PC as well as on the machinecontrol and gets familiar with all aspects of control programming in detail.


  • Handling like the Fagor 8055 industry control with horizontal softkeys
  • Detailed error messages about drive problems and programming faults
  • Operation via PC keyboard, control keyboard and mouse
  • Languages: German, English, French, Spanish
  • Programs and tool data will be stored permanently
  • Position offset will be stored permanently
  • Large NC program memory (limited only by the size of the hard disc)
  • Reproduced software version 08.11 for TURN and 07.11 for MILL


When scratching the reference workpiece the workpieces offsets will be taken over.
When scratching the measured workpiece the position offsets will be taken over.
In the run-up to the machining process collisions and programming mistakes can be avoided and corrected by using the dry run.
Already finalized NC codes can be skipped.
In order to ease the operation and the programming the control is equipped with an editor with helping cycles and pictures.
The contours the workpieces should have after the machining process are illustrated by graphics in the programming process.
Alarms, signals, versions and customer information are displayed by the diagnostics.




Our demo versions contain the full function range, but they are limited to 30 days (from date of installation). You can convert the demo version into a full version by using the license manager and entering the activation code.

Title Version Filesize
DEMO 1.30 36.52 MB


Get up to date. The only requirement is that you have a valid license key. The improvements concerning the update are documented in History.

You are reminded that, in case of an update, all WinNC-components  (WinNC-controls, 3DView, DNC, Robotic, CAMConcept,...) located in the regarding directory must be updated to the current release-version.

Title Version Filesize
UPDATE 1.30 36.52 MB
short description für update installation 415.01 KB
ACC update 2.32 20.66 MB
MSD/PLC 2015.07.09 718.59 KB
Remove SPOX 2006.12.05 1.92 MB
AC95_ACC 2013.10.15 3.12 MB


Title Version Filesize
Brochure EMCO Software 1.46 MB


Title Version Filesize
control manual milling A2005-03 2.93 MB
control manual turning A2004-10 3.79 MB
startup milling and turning J2015-01 812.22 KB
Get Acrobat Reader web logo Get Adobe Reader

More downloads

Title Version Filesize
Digitizer-Overlay Mill 98.00 KB







1.3019.12.2014Adaption ACpn-machines, Easy2control
1.2811.03.2013Compatibility 'WinNC for Sinumerik Operate' / Windows8
1.2615.05.2012Compatibility 'WinNC for Sinumerik Operate'
1.2425.09.2009Integration CM250
1.2223.06.2008Integration CM450
Enhancements for 3DView
Enhancements for CT250, 
WinConfig replaced by EMConfig
1.1803.06.2005tool-administration for 3D-View, Profile milling 4th axis
1.1624.01.2005Error-correction contourturning XC,ZC Fagor Mill
1.1101.10.2004Market launch


Licences Fagor 8055
External programmer work place for any CNC machine tool
For external NC programming of NC controlled machine tools. It may be installed within an institute registered by the licenser in an unlimited number on PC workstations respectively in a network.
Control software for all EMCO Concept machines
Temporary multiple license


Fagor 8055


Title Version Filesize
control manual milling A2005-03 2.93 MB
control manual turning A2004-10 3.79 MB
startup milling and turning J2015-01 812.22 KB


EMCO Win3D-View

Win3D-View is a 3D simulation for turning and milling and is available as an option in addition to the WinNC Control. Graphic simulations of CNC controls are designed especially for industrial experience. Win3D-View displays exceed industry standards. Tools, blanks, clamping devices, and work processes are highly realistic. The system checks the programmed travel of the tool to prevent collision with clamping devices and blanks. For further information click here.

Concept machines

Whether for small businesses or for professional CNC training the Concept machines can be applied flexibly. With its modular concept the machine series can be used in a productional CIM network as well as for training purposes equipped with training softwares and coursewares. For more information about the Concept machines click "machines" in the main menu.

Basic keyboard

An external keyboard supports practical programming on an external programmer work place.

Control specific keyboard - key module

In addition to the interchangeable control all Concept machines can be equipped with, there's the possibility to get the control specific keyboard. By using the control keyboard (accessory with interchangeable key modules for the respective control type) the operation becomes easier and has a higher didactic value by its similarity to the original control.




“Easy2control” adds a range of attractive applications to the successful interchangeable control system used in EMCO training machines. Suitable for use in machines and simulation workplaces alike, it displays additional control elements directly on the screen and, when used together with a touchscreen monitor, provides the ideal input interface. With support for a wide range of keyboard variants, customer-specific screen layouts and tailored solutions for individual customers, Easy2control represents a promising and highly flexible extension to the modular EMCO training concept.
The interchangeable controls are represented using an on-screen keyboard, which makes switching between different control systems even easier and quicker.


CAMConcept is innovative software for complete CAD/CAM and CNC training, from design to manufacture.CAMConcept incorporates both the functions of a professional CAD/CAM system and the advantages of a special training program. All core CAD program functions are available. Graphic displays of CNC cycles allow quick programming, while simulations and collision checks ensure that control programming is safe. For more information, click here.